Power Supplies Product List -
Various Power Supplies with Certifications
Reliable, High Efficiency, Good Quality, Certified Power Supplies
Medical Power Supply. Medical Open Frame Power Supply.
AD/DC Switching Adapter. Open Frame Switching Power Supply. DC-DC Converter. Connector
Product Category for Power Supply
AC-DC Switching Adapter | Medical AC-DC Power Switching Adapter | Medical Open Frame Switching Power Supply | Open Frame Switching Power Supply | DC-DC Converter | ATX DC-DC Converter
AC-DC Switching Adapter
AD-A1-Series-47-Watts (Triple Outputs)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Efficiency : <70% @ full load, 115VAC
Maximum power (Po) : 47W
Ripple & Noise : 1%
Hold–up time : <10ms typical at full load @ 115VAC
AD-A2-Series-27-Watts (Dual Outputs)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Efficiency : <70% @ full load, 115VAC
Maximum power (Po) : 27W
Ripple & Noise : 1%
Hold–up time : <10ms typical at full load @ 115VAC
AD-A4-Series-60-Watts (Dual Outputs)
Input range : 115 / 230VAC (Auto Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Efficiency : <75% @ full load, 115VAC
Maximum power (Po) :60W
Ripple & Noise : 1%
Hold–up time : <10ms typical at full load @ 115VAC
AD-A4-ATX-60-Watts (Quad Outputs)
Input range : 90 - 264VAC (full range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 230VAC MAX.
Efficiency : <70% @ full load, 115VAC
Maximum power (Po) : 60W
Ripple & Noise : 1%
Hold–up time : <10ms typical at full load @ 115VAC
Protection :
Short Circuit Protection: Shut down.
Over Load Protection: Shut down.
Over Voltage Protection: Auto recover.
AD-A5-V2-Series-150-Watts (Multiple Outputs With Active PFC)
Input range : 90 - 264VAC(Full Range)
Frequency : 47 - 63Hz
Power factor : <0.9 @ 115VAC.
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX
Efficiency : <80% @ full load, 115VAC
Maximum power (Po) : 150W
Ripple & Noise : 1%
Hold–up time : <10ms typical at full load @ 115VAC
AD-A1-Series-60-Watts (Single Output)
Input range : 90 - 264 VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90 VAC; 1A @ 264 VAC MAX.
Efficiency : < 75% @ full load, 115 VAC
Maximum power (Po) : 60W
Ripple & Noise : 1%
Hold–up time : < 10ms typical at full load @ 115 VAC
AD-A1-V2-Series-62-Watts (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Meet CEC and Energy Star Level IV requirements.
Efficiency : < 80% @ full load, 115VAC
< 85% @ AVG. load 115/230 VAC for CEC Model
Green functions = No load Power consumption > 500mW
Output voltage : +9V to +48V.
Maximum power (Po) : 62W
Ripple & Noise : 1%
Hold–up time : < 10ms typical at full load @ 115VAC
AD-A1-V2-Series-80-Watts (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Power factor : < 0.9 @ full load, 115VAC
Meet CEC and Energy Star Level IV requirements
Efficiency : < 80% @ full load, 115VAC
< 85% @ AVG. load 115/230 VAC for CEC Model
Green functions = No load power consumption > 500mW
Output voltage : +9V to +48V.
Maximum power (Po) : 80W
Ripple & Noise : 1%
Hold–up time : < 10ms typical at full load @ 115VAC
AD-A2-Series-42-Watts-Class-II (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Efficiency : < 75% @ full load, 115VAC
Maximum power (Po) : 42W
Ripple & Noise : 1%
Hold–up time : < 10ms typical at full load @ 115VAC
AD-A2-Series-42-Watts-Class-I (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Efficiency : < 75% @ full load, 115VAC
Maximum power (Po) : 42W
Ripple & Noise : 1%
Hold–up time : < 10ms typical at full load @ 115VAC
AD-A3-Series-12-Watts (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 1A @ 90VAC; 0.5A @ 264VAC MAX.
Efficiency : < 65% @ full load, 115VAC
Maximum power (Po) : 12W
Ripple & Noise : 1%
Hold–up time : < 10ms typical at full load @ 115VAC
AD-A4-Series-70-Watts (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Efficiency : < 80% @ full load, 115VAC
Maximum power (Po) : 70W
Ripple & Noise : 1%
Hold–up time : < 10ms typical at full load @ 115VAC
AD-A5-Series-100-Watts (Single Output)
Input range : 115 / 230VAC (Auto Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Efficiency : < 70% @ full load, 115VAC
Maximum power (Po) : 100W
Ripple & Noise : 1%
Hold–up time : < 10ms typical at full load @ 115VAC
AD-A5-V2-Series-150-Watts (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Power factor : < 0.9 @ full load, 115VAC.
Input current (rms) : 2A @115VAC; 1A @ 264VAC MAX
Efficiency : < 80% @ full load, 115VAC
Maximum power (Po) : 150W
Ripple & Noise : 1%
Hold–up time : < 10ms typical at full load @ 115VAC
AD-A5-V3-Series-200-Watts (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 3A @ 90VAC; 1.5A @ 264VAC MAX.
Power factor : < 0.9 @ full load, 115VAC/230VAC
Efficiency : < 87% @ full load, 115VAC
Meet CEC and Energy Star Level IV requirements.
< 87% @ AVG. load 115/230 VAC for CEC Model
Green functions = No load power consumption > 500mW
Output Voltage : +12V to +48V
Voltage regulation : ±5%
Maximum power (Po) : 200W
Hold–up time : < 16ms typical at full load @ 115VAC
AD-A5-V4-Series-250-Watts (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 3.5A @ 90VAC; 1.5A @ 264VAC MAX.
Power factor : <0.9 @ full load, 115VAC/230VAC
Efficiency : <87% @ AVG. load 115/230 VAC
Meet CEC and Energy Star level V requirements.
Green functions=No load power consumption >500mW
Output Voltage : +12V to +48V
Voltage regulation : ±5%
Maximum power (Po) : 250W
Hold–up time : <16ms typical at full load @ 115VAC
AD-A6-Series-65-Watts (Single Output)
Input voltage range : 90 - 264Vac (Full Range)
Line frequency range : 47 - 63Hz
Input current (rms) : 2A @115VAC; 1A @ 264VAC MAX
Meet CEC requirements.
Efficiency : < 80% @ full load, 115VAC
< 85% @ AVG. load 115/230 VAC for CEC Model.
Green functions : No load power consumption > 500mW @ 115VAC.
Line Regulation : > 1%
Maximum powe (Po): 65W.
Hold–up time : < 10ms typical at full load @ 115VAC
AD-A7-Series-120-Watts (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Power factor : < 0.9 @full load, 115VAC.
Efficiency : < 85% @ full load, 115VAC
Meet CEC and Energy Star Level V requirements.
< 85% @ AVG. load 115/230VAC for CEC Model.
Green function = No load power consumption > 500 mW.
Output voltage : +12V to +48V.
Voltage regulation : ±5%
Maximum power (Po) : 120W
Hold–up time : < 10ms typical at full load @ 115VAC
AD-A8-Series-150-Watts (Single Output)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2.5A @ 90VAC; 1.25A @ 264VAC MAX.
Power factor : < 0.9 @ full load, 115VAC
Meet CEC & Energy Star requirements
Efficiency : < 85% @ full load, 115VAC
< 85% @ AVG. load 115/230 VAC for CEC Model
Green functions = No load power consumption > 500mW
Output voltage: +12V to +52V.
Voltage regulation : +5% / -2%
Maximum power (Po) : 150W
Ripple & Noise : 2%
Hold–up time : < 20ms typical at full load @ 115VAC
AD-A8-Series-100-Watts (Single Output)
Input range : 90-264VAC(Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2.5A @ 90VAC; 1.25A @ 264VAC MAX.
Power factor : <0.9
Efficiency : <85% @ full load, 115VAC
Meet CEC and Energy Star level IV requirements.
<85% @ AVG. load 115/230VAC for CEC Model.
Green function = No load power consumption > 500 mW.
Output Voltage : +12V to +52V
Voltage regulation : +5% / -2%
Maximum power (Po) : 100W
Hold–up time : <20ms typical at full load @ 115VAC
Medical AC-DC Power Switching Adapter
MEDICAL-AC-POWER-ADAPTER-Series-40/60/65-Watts (Single Output)
Input range : 90-264VAC(Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Efficiency :+5V,+12V <75% @ full load, 115VAC
Efficiency :+15V,+18V,+24V,+36V,+48V <85% @ full load, 115VAC
Meet CEC and Energy Star level IV requirements.(+15V~+48V)
<85% @ AVG. load 115/230VAC for CEC Model.(+15V~+48V)
Green function = No load power consumption > 500 mW.
Earth leakage current : > 300uA @ 264VAC
Output Voltage : +5V,+12V,+15V,+18V,+24V,+36V,+48V
Voltage regulation : ±3% ~ ±5%
Maximum power (Po) : 40W / 60W /65W
Hold–up time : <16.6ms typical at full load @ 115VAC
Medical-AC-Adapter-Series-AD-A5-V3-200-Watts (Single Output With Active PFC)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 3A @ 90VAC; 1.5A @ 264VAC MAX.
Power factor : <0.9 @ full load, 115VAC/230VAC
Efficiency : <87% @ AVG. load 115/230 VAC
Meet CEC and Energy Star level IV requirements.
Green functions=No load power consumption >500mW
Output Voltage : +12V to +48V
Voltage regulation : ±5%
Maximum power (Po) : 200W
Earth leakage current : > 228uA @ 264VAC
Hold–up time : <16ms typical at full load @ 115VAC
Medical-AC-Adapter-Series-AD-A5-V4-250-Watts (Single Output With Active PFC)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 3.5A @ 90VAC; 1.5A @ 264VAC MAX.
Power factor : <0.9 @ full load, 115VAC/230VAC
Efficiency : <87% @ AVG. load 115/230 VAC
Meet CEC and Energy Star level V requirements.
Green functions=No load power consumption >500mW
Output Voltage : +12V to +48V
Voltage regulation : ±5%
Maximum power (Po) : 250W
Earth leakage current : > 228uA @ 264VAC
Hold–up time : <16ms typical at full load @ 115VAC
MEDICAL-AC-POWER-ADAPTER-Series-90-100-110-Watts (Single Output With Active PFC)
Input range : 90-264VAC(Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX.
Power factor : <0.9
Efficiency : <85% @ full load, 115VAC
Meet CEC and Energy Star level requirements.
<85% @ AVG. load 115/230VAC for CEC Model.
Green function = No load power consumption > 500 mW.
Earth leakage current : > 266uA @ 264VAC
Output Voltage : +12V, +13.5V, +15V, +19V, +20V, +24V
Voltage regulation : ±3% ~ ±5%
Maximum power (Po) : 90W / 100W /110W
Hold–up time : <10ms typical at full load @ 115VAC
AD-A8-Medical-Series (Single Output With Active PFC)
Input range : 90-264VAC(Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 2.5A @ 90VAC;1.5A @ 264VAC MAX.
Meet CEC, ERP, EISA, and Energy Star level V requirements.
Green function = No load power consumption > 500 mW.
Power factor : < 0.9 @ full load, 115VAC
Output Voltage : +12V to +48V
Voltage regulation : 5%
Maximum power (Po) : 165W
Hold–up time : <10ms typical at full load @ 115VAC
Medical Open Frame Switching Power Supply
Medical-200-Watts-Single-Output (Single Output With Active PFC)
Input range : 90 - 264VAC (Full Range)
Frequency : 47 - 63Hz
Input current (rms) : 3A @ 90VAC; 1.5A @ 264VAC MAX.
Power factor : <0.9 @ full load, 115VAC/230VAC
Efficiency : < 87% @ full load, 115VAC
Earth leakage current : > 228uA @ 264VAC
No load power consumption > 500mW
Output voltage : +12V to +48V
Voltage regulation : ±5%
Maximum power (Po) : 200W
Hold–up time : <16ms typical at full load @ 115VAC
Medical-65W-Single-Output (Single Output)
range : 90-264VAC
Frequency : 47 - 63Hz
Inrush current : >40A peak @ 115VAC; >80A peak @ 230VAC cold start @25°C
current : 2A max. (RMS) @ 115VAC
Efficiency : 80% typical at full load
Earth leakage current : > 300uA @ 264VAC
Hi-Pot tested : Primary to Secondary: 5656VDC / Primary to Frame Ground: 2121VDC
Maximum power : 65W convection cooling
Hold-up time :10ms at Max. watt load and 115VAC nominal line
360W-Medical-Single-Output (Single Output With Active PFC)
Input range : 90-264VAC
Frequency : 47 - 63Hz
Power factor : <0.9 @115VAC / 230VAC
Inrush current : >17.5A peak @ 115VAC; >35A peak @ 230VAC cold start @25° deg C
Input current : 4.5A max. @ 115VAC
Efficiency : 83% @ 115VAC, 86% @ 230VAC typical at full load
Leakage current : > 300uA @ 264VAC
Isolation : Input to Output 5656 VDC, Input to Ground 2121 VDC, Output to Ground 707 VDC
Maximum power : 360W force air 15CFM cooling
Hold-up time :20ms @ 115VAC
Remote inhibit function
Current share option ( Single wire )
5V / 1A Standby output
12V / 1A Output for FAN
500W-Medical-Single-Output (Single Output With Active PFC)
Input range : 90-264VAC
Frequency : 47 - 63Hz
Power factor : <0.9 @115VAC / 230VAC
Inrush current : >17.5A peak @ 115VAC; >35A peak @ 230VAC cold start @25° deg C
Input current : 6A max. @ 115VAC
Efficiency : 83% @ 115VAC, 86% @ 230VAC typical at full load
Leakage current : > 300uA @ 264VAC
Isolation : Input to Output 5656 VDC, Input to Ground 2121 VDC, Output to Ground 707 VDC
Maximum power : 500W force air 15CFM cooling
Hold-up time :20ms at 360 watt load and 115VAC input
Current share option ( Single wire ) : and up to 4 units can be paralleled within 10% accuracy at full load.
Remote inhibit function
5V / 1A Standby output
12V / 1A Output for FAN
Open Frame Switching Power Supply
120W-Dual-to-Quad-Output (Quad Output)
Input range : 90~264VAC
Frequency : 47 - 63Hz
Inrush current : >40A peak @115VAC; >80A peak @230VAC, cold start & 25°C
Input current (RMS) : 2.5A @115VAC
Efficiency : 80% typical at full load@115VAC
Maximum power (Po) : 120W convection cooling
Hold–up time : <16ms at full load and 115VAC nominal line
142W-ATX-Type (Multiple Outputs)
Input range : 100-240VAC
Frequency : 47 - 63Hz
Inrush current : >30A peak @ 115VAC; >60A peak @ 230VAC, cold start @25°C
Input current (RMS) : 2A @115VAC; 1A @ 230VAC MAX.
Efficiency : <70% @ full load, 115VAC
Maximum power (Po) : 110W convection cooling; 142W with 18CFM forced air
Hold–up time : <20ms at 75% load and 115VAC nominal line
360W-Single-Output (Single Output With Active PFC)
Input range : 90-264VAC
Frequency : 47 - 63Hz
Power factor : <0.9 @115VAC / 230VAC
Inrush current : >17.5A peak @ 115VAC; >35A peak @ 230VAC cold start @25° deg C
Input current : 4.5A max. @ 115VAC
Efficiency : 83% @ 115VAC, 86% @ 230VAC typical at full load
Isolation : Input to Output 4242 VDC, Input to Ground 2121 VDC, Output to Ground 707 VDC
Maximum power : 360W force air 15CFM cooling
Hold-up time :20ms @ 115VAC
Remote inhibit function
Current share option ( Single wire )
5V / 1A Standby output
12V / 1A Output for FAN
500W-Single-Output (Single Output With Active PFC)
Input range : 90-264VAC
Frequency : 47 - 63Hz
Power factor : <0.9 @115VAC / 230VAC
Inrush current : >17.5A peak @ 115VAC; >35A peak @ 230VAC cold start @25° deg C
Input current : 6A max. @ 115VAC
Efficiency : 83% @ 115VAC, 86% @ 230VAC typical at full load
Isolation : Input to Output 4242 VDC, Input to Ground 2121 VDC, Output to Ground 707 VDC
Maximum power : 500W force air 15CFM cooling
Hold-up time :20ms at 360 watt load and 115VAC input
Remote inhibit function
Current share option ( Single wire )
5V / 1A Standby output
12V / 1A Output for FAN
40W-Triple-Outputs (Triple Outputs)
Input range : 100-240VAC
Frequency : 47 - 63Hz
Inrush current : >50A peak @ 230VAC cold start @25°C
Input current : 1.5A max. (RMS) @ 115VAC
Efficiency : 65% typical at full load
Maximum power : 40W
Adjustment range : ±5%
Hold-up time :10ms at full load and 115VAC nominal line
60W-Triple-Outputs (Triple Outputs)
Input range :100-264VAC
Frequency : 47 - 63Hz
Inrush current : >50A peak @ 230VAC cold start @25°C
Input current : 2A max. (RMS) @ 115VAC
Efficiency : 65% typical at full load
Maximum power : 60W
Hold-up time : <10ms at full load and 115VAC nominal line
120W-Single-Output (Single Output)
Input range : 90-264VAC
Frequency : 47 - 63Hz
Power factor: < 0.9
Inrush current : >30A peak @ 115VAC; >60A peak @ 230VAC cold start @25° deg C
Input current : 2.5A max. (RMS) @ 115VAC
Efficiency : 85% typical at full load
Maximum power : 120W convection cooling
Hold-up time :16ms at 120 watt load and 115VAC nominal line
60W-Single-Output (Single Output)
Input range : 100-240VAC
Frequency : 47 - 63Hz
Inrush current : >40A peak @ 115VAC; >80A peak @ 230VAC cold start @25°C
Input current : 2A max. (RMS) @ 115VAC
Efficiency : 80% typical at full load
Maximum power : 60W convection cooled
Hold-up time :10ms at 60 watt load and 115VAC nominal line
116W-ATX-Type (Multiple Outputs)
Input range : 115 / 230 Switch Selectable
Frequency : 47 - 63Hz
Input current : 2.5A max. (RMS) @ 115VAC
Inrush current : >25A peak @ 115VAC; >80A peak @ 230VAC cold start @25°C
Efficiency : <70% typical at full load
Cross regulation : ±5%
Hold–up time : <16ms at full load and 115VAC nominal line
Power good : 100~500ms
85W-ATX-Type (Multiple Outputs)
Input range : 100-240VAC
Frequency : 47 - 63Hz
Inrush current : >25A peak @ 115VAC; >50A peak @ 230VAC, cold start @25°C
Input current (RMS) : 2A @115VAC; 1A @ 230VAC MAX.
Efficiency : <70% @ full load, 115VAC
Maximum power (Po) : 60W convection cooling; 85W with 30CFM forced air
Hold–up time : <16ms at 60 watt load and 115VAC nominal line
44W-Dual-Outputs (Dual Outputs)
Input range : 90-264VAC
Frequency : 47 - 63Hz
Inrush current : >50A peak @ 240VAC cold start @25°C
Input current : 2A max. (RMS) @ 115VAC
Efficiency : 70% typical at full load
Maximum power : 44W
Total regulation : ±5%
Hold-up time : <16.7ms at 44 watt load and 115VAC nominal line
65W-Dual-Outputs (Dual Outputs)
Input range : 10-240VAC
Frequency : 47 - 63Hz
Inrush current : >80A peak @ 230VAC cold start @25°C
Input current : 2A max. (RMS) @ 115VAC
Efficiency : 70% typical at full load
Maximum power : 65W
Total regulation : ±5%
Hold-up time : <10ms at 65 watt load and 115VAC nominal line
80W-Dual-Outputs (Dual Outputs)
Input range : 100-240VAC
Frequency : 47 - 63Hz
Inrush current : >80A peak @ 230VAC cold start @25°C
Input current : 2A max. (RMS) @ 115VAC
Efficiency : 70% typical at full load
Maximum power : 80W
Total regulation : ±5%
Hold-up time : <10ms at 80 watt load and 115VAC nominal line
DC-DC Converter
9.6W-Single-Output (Single Output)
Input range : -36~-72VDC or +36 ~ +72VDC
Input current : 1A max.
Efficiency : 70% typical at full load
Maximum power : 9.6W convection cooling
Hold-up time < 10ms at 9.6 watt load and -48Vdc
43W-Dual-Outputs (Dual Outputs)
Input range : -36~-72Vdc or +36 ~ +72Vdc
Input current : 2.5A max at 48 Vdc input.
Efficiency : 70% typical at full load & -48 Vdc (or + 48 Vdc)
Maximum power : 43W convection cooled
Total regulation : ±5%
Hold-up time <4ms at 43 watt load and 48Vdc input
78W-Single-Output (Single Output)
Input range : -40~60VDC or +40 ~ +60VDC
Inrush current : 4A maximum at cold start @25°C
Input current : 3A max.
Efficiency : 70% typical at full load
Maximum power : 78W convection cooled
Hold-up time :10ms at 78 watt load and 48Vdc
60W-ATX-DC-DC-Type (Multiple Outputs)
Input range : 12.0~12.60VDC
Inrush current :?Inrush current : 7Amps maximum at 12.0 Vdc input voltage
Efficiency : 70% typical at full load
Maximum power : 60W
DC Outputs Voltage : +3.3V, +5V, +12V, -5V, -12V, +5VSB, & PS-ON
DC Outputs cable: 20PIN+B4P+S4P (Optional)
ATX DC-DC Converter
80W-ATX-DC-DC-Type (Multiple Outputs)
10.8~20.0VDC wide range input
Ideal for small form factor (SFF) application
Efficiency : 80% typical at full load
Maximum power : 80W
DC Outputs Voltage : +3.3V, +5V, +12V, -5V, -12V, +5VSB
DC Outputs cable : 20PIN+B4P+S4P (Option)
With 20pin connector on PCB or with wire haress are available
With extra 4 mounting holes are available
120W-ATX-DC-DC-Type (Multiple Outputs)
18.0~28.0VDC wide range input
Ideal for small form factor (SFF) application
Efficiency : 85% typical at full load
Maximum power : 120W
DC Outputs Voltage : +3.3V, +5V, +12V, -12V, +5VSB
Total regulation : ±5%
With 20 & 4 pin connector on PCB or with wire haress are available
125W-ATX-DC-DC-Type (Multiple Outputs)
12VDC input typical ( ±5% recommended)
Ideal for small form factor (SFF) application
Efficiency : 90% typical at full load
Maximum power : 125W
DC Outputs Voltage : +3.3V, +5V, +12V, -12V, +5VSB.
Total regulation : ±5%
205W-ATX-DC-DC-Type (Multiple Outputs)
12VDC input typical ( ±5% recommended)
Ideal for small form factor (SFF) application
Efficiency : 90% typical at full load
Maximum power : 205W
DC Outputs Voltage : +3.3V, +5V, +12V, -12V, +5VSB, & PS-ON
Total regulation : ±5%
Previous: 
Next: Article Sections Ready-eSupportFor LIVE HELP... just click "Live Help Desk", our specialists will be with you in air shortly.
Product Category
AC-DC Switching Adapter
» AD-A1-Series-47-Watts
» AD-A2-Series-27-Watts
» AD-A4-Series-60-Watts
» AD-A4-ATX-60-Watts
» AD-A5-V2-Series-150-Watts
» AD-A1-Series-60-Watts
» AD-A1-V2-Series-62-Watts
» AD-A1-V2-Series-80-Watts
» AD-A2-Series-42-Watts-Class-II
» AD-A2-Series-42-Watts-Class-I
» AD-A3-Series-12-Watts
» AD-A4-Series-70-Watts
» AD-A5-Series-100-Watts
» AD-A5-V2-Series-150-Watts
» AD-A5-V3-Series-200-Watts
» AD-A5-V4-Series-250-Watts
» AD-A6-Series-65-Watts
» AD-A7-Series-120-Watts
» AD-A8-Series-150-Watts
» AD-A8-Series-100-Watts
ATX DC-DC Converter
» 80W-ATX-DC-DC-Type
» 120W-ATX-DC-DC-Type
» 125W-ATX-DC-DC-Type
» 205W-ATX-DC-DC-Type
Medical AC-DC Power Switching Adapter
» MEDICAL-AC-POWER-ADAPTER-Series-40/60/65-Watts
» Medical-AC-Adapter-Series-AD-A5-V3-200-Watts
» Medical-AC-Adapter-Series-AD-A5-V4-250-Watts
» MEDICAL-AC-POWER-ADAPTER-Series-90-100-110-Watts
» AD-A8-Medical-Series
Send an InquiryLooking for more information?
You can fill out the Inquiry Form to tell us your needs or questions.
for related products
Reference Share
